WBY100（6c）比对显微镜英文说明书

 1、Introduction

Through optical enlargement, this comparison microscope, can help the user to observe clearly, by looking into the same eyepiece set, the images in both the right and the left imaging view fields, and compare two or more objects effectively in split-image or overlapping view fields. Due to its powerful magnification, this instrument enables the user to perceive the differences between very small similar objects.

Model WBY-6C Comparison Microscope is a new generation product of our long-time experience and technical innovation. With our success in solving the technical problem of the adjustability of its separation line width, its quality has, therefore, reached the international advanced standard. It is very suitable to be used for forensic science laboratory research work, for comparing all kinds of bullets, cartridge cases, cutting objects, paper documents and etc.

 

2、Main Specification Features

Ø Total Magnification: 3.36x~108x

Ø Binocular Head :Inter-pupillary Distance 48mm-75mm, Diopter Adjustable +/-5°

Ø High Eye Point Wide Field Eyepiece :WF10x/22mm

Ø Objective : 0.7x~4.5x

Ø Working Distance: 95mm

Ø View Field in Object End Dia. 2～60 mm

Ø Separation Line Control, to switch view field in full left, full right, split-image or overlapping image comparison mode

Ø Control square working stage to move in X/Y/Z 3D direction

Ø Control round stage rotating 360° in both clockwise and counterclockwise direction

Ø Separation Line Adjusting System On Back of Main Body Bridge

Ø 12V50W Fan Cooling Strong Halogen Light, Brightness Adjustable

Ø Main Body Size 400x400x700mm

Ø Net Weight 22 Kgs

 

Options:

Ø 3.0M High Resolution Color CCD Camera, USB 2.0 Output

Ø Professional forensic image analysis software

Main Optical Parameter

 

Microscope optical system’s magnification, working distance and view field diameter are shown as below:

Magnification	Eyepiece	WF10X
	Bridge magnification	1. 2X
	Objective	0.7X-4.5X
	Total Magnification	3.36X-108X
Viewfield	Φ2mm-φ60mm
Working Distance	95mm
Object Stage	Movement range: X 54mm, Y 54mm, Z 54mm Horizontal linking-up range between two object stages: 54mm Longitudinal linking-up range between two object stages: 62mm
Light Source	Reflection light , LED cold light source

 

 

3、  Installation

3.1、Check the main body  and all of the accessories according to packing list.

Put the main body   on the  wide and stable table , The lamp holder （2）  on top of the objective  is  used  to  fix   cold  light  source（1）  can  be controlled by switch on panel. As shown in  Fig. 1